John Deere 435 and 535 Round Hay Baler Manual

Name: John Deere 435 and 535 Round Hay Baler Manual
Brand: John Deere
SKU: JD-Hay-Tools-OPT-051719-123
Price: 24.99 USD
Availability: InStock

This is the complete operator's manual for the John Deere 435 and 535 round hay baler.

This owner's manual contains information on operating, adjusting, maintaining and troubleshooting for your JD round hay baler.

Safety

Preparing the Tractor

Adjusting the Drawbar

Adjusting Tractor Wheels

Checking Ballast, Wheel Spacing, and Tire Inflation

Setting Hydraulic Outlets

Tractor Electrical Hookup

Install Convenience Outlet On: Negative Ground Tractors Without

SOUND-GARD Bodies

Positive Ground Tractors Without SOUND-GARD Bodies

Tractors With SOUND-GARD Bodies

Install BALE-TRAK Monitor Console

Using Heavy-Duty Tractor Drawbar

Using Drawbar Shield

Making Drawbar Shield

Preparing the Baler

Selecting Twine

Loading Twine Boxes

Tying Sheet Bend Knot—Plastic Twine

Tying Modified Square Knot—Sisal Twine

Routing Twine From Right-Hand Twine Box (Rear Arm)

Routing Twine From Left-Hand Twine Box (Front Arm)

Adjusting Twine Spacing

Tire Inflation

Attaching and Detaching

Transporting

Handling Round Bales

Operating the Baler

BALE-TRAK Monitor

How the Baler Forms a Bale

Crop Preparation

Breaking-ln

Forming a Bale

Gate Lock Valve

Using Manual Twine Trip Rope

Operating Twine Arm With Empty Baler

Rotating Baler By Hand

Adjusting Bale Size

Bale Density Gauge

Adjusting:

Bale Density

Pickup Height

Converging Wheel Height

Unplugging Baler Under Power

Unplugging Baler With Hydraulic Pickup

Lift

Compressor Rack Assembly

Removing

Installing

Adjusting

Starting a Bale in Difficult Conditions

Baling Short, Dry, Slick Crops

Baling Cornstalks

Baling Wet Hay

Extinguishing a Fire

Bale Push Bar Operation (Optional)

Operating Baler With Push Bar (Optional)

Engaging Bale Push Bar (Optional)

Locking Out Bale Push Bar (Optional)

Attachments

Lubrication and Maintenance

Perform Lubrication and Maintenance

Alternative Lubricants

Hydraulic Pump Oil

Chains

Extreme Pressure Grease

Gear Oil

Lubrication and Maintenance:

Every 10 Hours

Every 30 Hours

Every 50 Hours

Every 100 Hours

Annually

Troubleshooting

Automatic Twine Wrap

BALE-TRAK Monitor Difficulties

Feeding Difficulties

Pickup Difficulties

Bale Quality

General Baler Difficulties

Silage Bundle Difficulties

Service

Practice Safety

Mounting Tires

Tractor/Monitor Wiring Diagram

Baler Wiring Diagram

Bale Tension and Gate Hydraulic System

Adjusting Chains

Adjusting Upper Drive Roll Chain

Servicing Upper Chain and Idler

Adjusting Drive Slip Clutch

Checking Belt Tracking

Adjusting Belt Tracking

Adjusting Lower Feed Roll Scraper

Adjusting Bale Size Indicator

Replacing Tension Wear Channel

Adjusting Twine Trip Rod and Valve Latch Clearance

Adjusting Twine Trip Rope

Checking Pump Drive Latch Adjustment

Adjusting Pump Idler Switch

Checking Knife Register

Adjusting Twine Cutter Anvil

Twine Arm Timing (435)

Twine Arm Timing (535)

Adjusting:

Twine Cutter Tension (435)

Number of Twine Wraps on R-H End of Bale (435)

Twine Distance From R-H End of Bale

(435)

Twine Cylinder Installation Dimensions

(435)

Adjusting:

Twine Cutter Tension (535)

Number of Twine Wraps on R-H End of Bale (535)

Twine Arm Travel To Shift Valve (535)

Twine Cylinder Installation Dimensions (535)

Adjusting Gate Latch Stop

Adjusting Gate Latch Linkage

Adjusting Twine Indicator Retaining Strap

Checking Microswitches

Adjusting:

Gate Latch Switch (Green Light)

Twine Arm Switch (Solid Yellow Light)

Flashing Yellow Light Switch

Oversize Bale Switch (Red Light)

Bale Shape Senders

Pickup Float Springs

Pickup Belt Idler

Removing Center and Rear Tension Arm

Rolls

Removing Front Tension Arm Roll

Installing Orifice in Tractors With Low

Hydraulic Flow

Priming Twine Hydraulic Pump

Raising Gate With Hoist

Checking Belt Pins

Removal of All Belts or Spring Rods

Installing Belts

Repairing Belts

Belts Eligible for Warranty Replacement

Belts Not Eligible for Warranty

Replacement

Surface Wrap—Preparing the Baler

Selecting Surface Wrap Material

Care of Surface Wrap Material

Additional Surface Wrap Storage

Opening Surface Wrap Box

Installing Surface Wrap and Routing

Through Rolls

Closing Surface Wrap Box

Surface Wrap—Operating the Baler

General Information

How the Surface Wrapping Mechanism

Works

BALE-TRAK Monitor Operation With

Surface Wrap

Discharging Bale With Surface Wrapping

Mechanism

Changing From Twine Wrapping to

Surface Wrapping

Adjusting Number of Surface Wraps

Changing From Surface Wrapping to

Twine Wrapping

Operating Surface Wrap System With Empty Baler

Releasing Knife Arm Manually

Surface Wrap—Lubrication

Every 30 Hours

Annually

Surface Wrap—Troubleshooting

Surface Wrap—Service

Practice Safety

Adjusting Feed Roll Pressure

Checking Drive Belt Length

Removing and Installing Belt

Removing and Installing Knife

Checking Brake

Adjusting Microswitch

Removing Wrappage From Feed Rollers

Adjusting Knife Arm Stop

Servicing Lower Front Gate Roll

Surface Wrapping Hydraulic System

Storage

Crime Prevention Tips

Specifications

Index

Pages: 194

Years and Serial Numbers: Covers all years and serial numbers

Models: 435 and 535

Make: John Deere

Manual Code: OME79133

Manual Type: Operator's Manual/ Owner's Manual

Your payment information is processed securely. We do not store credit card details or have access to your credit card information.

John Deere 435 and 535 Round Hay Baler Manual

Product Description

Table of Contents

Manual Details

Payment & Security

Recently viewed

You may also like