Allis-Chalmers 2000 Semi-Mounted Plow Manual
Product Description
This is the operator's manual for the Allis-Chalmers 2000 semi-mounted plow.
This manual contains information on operating, adjusting, maintaining and troubleshooting for your Allis-Chalmers semi-mounted plow.
Table of Contents
- To Our Customer
- User's Responsibility - Warranty
- Contents
- Safety Precautions
- General Information
- Lubrication
- Maintenance and Service
- Wheel Bearings
- Hydraulic Re-Set Stub Beams
- Spring Trip Beams
- Maintenance and Storage
- Tire Selection
- Tractor Preparation
- Tractor Wheel Width Settings for Plowing
- Tractor Weights
- Sway Blocks
- Tractor Drawbar
- Tractor Life Lin ks
- Tractor Hyd rau I ic System
- Remote Cylinder Outlets
- Setting the Hitch
- Operation
- Three Point Hitch
- Ou ick Hitch
- Vertical Hitching - Line of Draft
- Adjustment and Worn Out or Dull Plow Blades
- Horizontal Hitching - Line of Draft
- Plow Side Draft
- How Wheel Steering Affects Plow Draft
- Tractor Wheel in Furrow
- Center Point of Pull
- Initial Hitch Settings
- Width of Cut-Front Bottom
- Winging Adjustment
- Fore and Aft Leveling
- Without Use Of Gauge Wheel
- With Rear Mounted Gauge Wheel
- Rear Furrow Wheel Adjustment
- Rear Mounted Gauge Wheel
- Plowing Depth
- Coulter Adjustment
- Rubber Spring Loaded Coulters
- Concave Coulters
- Spring Trips
- Automatic Re-set Plow Beams
- Accumulator for Plow with Converging Linkage
- Reset
- Charging Nitrogen Side of Accumulator
- Charging Oil Side of Accumulator
- Checking Gas Pressure in Accumulator
- Air Temperature and Gas Pressure
- CONTENTS
- Operation (Cont:d)
- Nitrogen Pressure
- Changing Blades - Shear Bolt and Spring Trip
- Bottoms
- Changing Plow Blades (Reset Beams Only)
- Operating Plow in Field •
- Transporting Plow
- Adjusting Plow
- Winging (Crosswise leveling)
- Depth
- Width of Cut - Front Bottom
- Vertical Line of Draft
- Horizontal Line of Draft - Side Draft
- Plow Side Draft
- Coulter Adjustment
- Field Service Tips
- Torque Values Chart
- Setting Up Instructions
- Attaching Pivot Bracket and Pull Bar
- Vertical Hitching
- Initial Hitch Settings
- Attaching Rear Furrow Wheel and Bottom Extensions
- (3 to 5 Bottoms)
- Attaching Rear Furrow Wheel and Bottom Extensions
- ( 6 Bottoms)
- Shear Bolt Spring Trip
- Spring Trip Beams
- Reset Beams
- Hydraulic for Reset Plows
- Rear Wheel Cylinder and lines
- Rear Furrow Wheel Cylinder and Fittings
- Accumulator
- Attaching Hydraulic Cylinders to Reset Beams
- Steering Tubes
- Rear Furrow Wheel Adjustment
- Rear Mounted Gauge Wheel
- Plow Bottom
- Cou lters
- Heavy Duty Shear Bolt Cou lters
- Single Arm Shear Bolt Coulters
- Single Arm Rubber Spring Loaded Coulters
- Attaching Coulters
- Concave Coulters
- Charging Hydraulic Reset System Converting Linkage Reset
- Checking Gas Pressure in Accumulator
- Hitch Bar and Slide
- Cylinder and Moving Cylinder Anchor
- Trash Cover Board ®
- Decal Installation
- Reflectors and SMV Emblem
Manual Details
Pages: 84
Years and Serial Numbers: Covers all years and serial numbers
Models: 2000
Make: Allis-Chalmers
Manual Code: 70593570
Manual Type: Operator's Manual
Payment & Security
Your payment information is processed securely. We do not store credit card details or have access to your credit card information.