John Deere 482C Forklift Manual

This is the complete operator's manual for the John Deere 482C forklift.

This owner's manual contains information on operating, adjusting, maintaining and troubleshooting your JD forklift.

Covers All Years and Serial Numbers - Other websites sell manuals that are incomplete or only cover a specific year of the machine. This manual is guaranteed to be complete and to cover your machine's model year and serial number.

Safety
Safety Signs
Operator s Station
- Instrument Panel
- Stop-Engine Indicator
- Service Required Indicator
- Engine Oil Indicator
- Engine Coolant Temperature
- Alternator Voltage Indicator
- Transmission Oil Temperature
- Hydraulic Oil Filter Indicator
- Park Brake Indicator
- Checking Instruments
- Control Levers, Pedals and Switches
- Seat
- Forklift Controls
- Seat Belt Adjustment
- Seat Lock Control
- Manual Holder
- Lights
Break-In
- 10 Hours
- 50 Hours
Pre-Start Inspection
Operating The Engine
- Starting The Engine
- Starting the Engine
- Coolant Heater
- Battery Booster
- tarting Fluid
- Warming the Machine
- Stopping the Engine
- Engine Elevation Adjustment
Driving the Machine
- Driving On Public Roads
- Brakes
- Brake Pedal Travel Check
- Park Brake
- Engine Speed Controls
- Clutch Disconnect Switch
- Direction Selector Lever
- Transaxle Gearshift Lever
- Parking the Machine
Operating the Machine
- Warming the Machine
- Fork Adjustment
- Forklift Control Lever
- Forklift Tilt Control Lever
- Forklift Side-Side Control Lever
- Four Wheel Drive Operation
- Differential Lock
- Operating Tips
- Fork Inspection
- Traveling
Transporting
- Trailer Loading
- Towing
Fuels and Lubricants
- Fuels
- Diesel Fuel Conditioner
- Storing Fuel
- Fuel tank
- Galvanized Containers
- Engine Oil
- Transaxle, Hydraulic, and Reverser Oil
- FWD Steer Axle Oil
- Grease
- Alternative Lubricants
- Lubricant Storage
- Mixing Lubricants
Periodic Maintenance
- Servicing the Machine
- Hourmeter
- Mud Build-Up
- Prepare the Machine for Service
- Removing the Sideshield
- Use of Fuels and Lubricants
- Fuel Service
- MARKS
- Oilscan
- Service Repair Record
Maintenance—As Required
- Belt Tension Adjustment
- Fuel Tank Sump
- Check Tire Pressure
- Tire Sizes
Maintenance—10 Hours or Daily
- Grease Mast Pivots and Trunnion
- Coolant Level
- Grease Steer Axle and Steering Cyl Pivots
- Air Restriction Indicator
- Engine Oil Level Check
- Grease Mast Sprocket Bearings
- Grease Steer Wheel Bearings
Maintenance—Every 100 Hours
- Grease Mast Channel
- Grease Control Lever Pivots
- Grease Carriage Chain
Maintenance—Every 250 Hours
- Transaxle Oil Level
- Hydraulic Reservoir Oil Level
- Engine Oil Filter
- Check Battery Electrolyte Level
- Reverser Oil Level
- Carriage Chain Tension
Maintenance—Every 500 Hours
- Grease Reverser and Engine Speed
- Control Linkage
- Hydraulic Oil Change
- Lubricate Drive Axle Bearings
- Hydraulic Oil Filter
- Hydraulic Oil Reservoir Breather
- Air Intake Hoses
- Coolant Conditioner
- Fuel filter
Maintenance—Every 1000 Hours
- Transaxle Oil Change
- FWD Transfer Case Oil Change—If
- Equipped
- Reverser and Torque Converter Oil
- Crankcase Ventilation Tube
- Engine Valve Lash (Clearance)
- Engine Speeds
- Engine Speed Control Linkage Check
- FWD Steer Axle Housing Oil Change
- FWD Steer Wheel Planetary Housing Oil
Maintenance
- External Service Brake Inspection
- Cooling System
- Drain Cooling System
- Testing Water Content
- Fill Cooling System
- Coolant Freeze Test
- Engine Coolant
- Air Cleaner Dust Valve
- FWD Steer Axle and Pivots Grease
- Grease FWD Steer Axle Universal Joints
- Grease FWD Steer Axle Drive Shaft Universals
- Coolant Hoses
- Reverse Warning Alarm
- Battery Service
- Electrolyte Check
- Battery Charger
- Battery Replacement
- Fuses
- Draining Fuel Filter
- Toe-in Adjustment
- Roller Carriage Wear Pad Adjustment
- Halogen Bulbs
- Fuel Strainer
- Neutral Start Check
- Park Brake
- Park Brake Adjust
- Direction Selector Lever Adjust
- Bleeding Air from Lift Cylinder
- Bleeding Brakes
- Control Valve and Cylinders
- Injection Nozzles
- Injection Pump
- Welding on the Machine
- Air Cleaner
- Clean Primary Air Element
- Clean Primary Element
- Inspect Air Cleaner Elements
- Torque Specification
- Metric Cap Screw Torque Values
- Inch Cap Screw Torque Values
- Oil Lines and Fittings
- Steer Wheel Cap Screw Torque
- 37' Flare and 30’ Cone Seat Connectors
- O-Ring Boss Fittings
- Flat Face O-Ring Seal Fitting
- Inch Four Bolt Flange Fitting
- Metric Four Bolt Flange Fitting
Operational Checkout
- Gauge, Indicator and Directional Lever
- Directional Selector Linkage, Neutral Start
- Park Brake, Hourmeter, Engine Control Linkage
- Brake System
- Steering System
- Driving Checks
- Driving Check for Steer Axle FWD
- Hydraulic System
- Accessories (Engine Stopped)
- Miscellaneous
Troubleshooting
- Engine
- Electrical System
- Hydraulic System
- Power Train
- Gauges and Indicators
- Steer Axle with Four Wheel Drive
Storage
Machine Numbers
Specifications
Crime Prevention Tips
Index

Pages: 212

Years and Serial Numbers: Covers all years and serial numbers

Models: 482C

Make: John Deere

Manual Code: OMT157598

Manual Type: Operator's Manual/ Owner's Manual

Your payment information is processed securely. We do not store credit card details or have access to your credit card information.

John Deere 482C Forklift Manual

Product Description

Table of Contents

Manual Details

Payment & Security

Recently viewed

You may also like